Rated 5.00 out of 5 based on 2 customer ratings
(2 customer reviews)

HDMI Cat Splitter 4k/1080p suit iQ4 to 40m HDBaseT

Compare

The new Colorspace 1×2 / 1×3 HDMI Splitter Extender supports HDBaseT 4K@60Hz, YUV4:4:4 colour and HDR, it can provide up to 40m at 4k and to 70m 1080p complete with auto down scaler for when a 4k TV is used  with 1080p TV’s. Supports HDMI 2.0 18Gbps, HDR10, HDCP 2.2, Bi-Directional IR+PoE. Uncompressed 4K@60Hz, with HDBaseT too over Cat6.

This extender is a fantastic Video & Audio device with HDMI 2.0 full compliance, latest high dynamic range, plus Dolby True HD, DTS-HD Master Audio when available and also compatible with other HD multi-channel audio formats (Stereo, LPCM 5.1/7.1) pass through. Extends IR signal from source to receiver or from transmitter to receiver (bi-directionalI POE. Phoenix RS232 Port for firmware update or RS232 control signal transmission.

Has 1 HDMI cable loop out at transmitter and 2 x HDMI out at Receiver, can connect one local TV at transmitter and one or two remote TVs at receiver. Output 1080P 60Hz automatically when a non-HDCP 2.2 4k display is connected, comes complete with IR device control. Great unit for use with Foxtel iQ4, AppleTV4 etc.  yes folk’s nothing gets near this at the price!.

Newer model to world markets.
See specs below.

with full local Aussie warranty of course!
think HDMI think EZYHD est. 2007

$379.00

1 in stock

SKU: CSpace Category:

Description

Features:

Bandwidth up to 18Gbps, resolution up to 4k@60hz, YUV4:4:4
Transmit up to 70m 1080p, 40m for 4k!
From RX receiver (if required) HDMI cable 10m or HDMI Cat extender 40m
Supports HDR 10, 3D
Video formats supported: 1080p up to 4k
Support 1, 2 or 3TV’s
Can control input device via IR from distant TV’s
With 1 x HDMI (loop) out at Transmitter and up to 2x HDMI out at Receiver
Bi-directional wide band IR and RS232Passthrough
Dual POC (can be powered by TX transmitter or by RX Receiver)
HDCP 2.2 – HDCP 1.4 Compliant

In Box:

1 x IR TX Sender
1 x IR RX unit
1 x TX IR Blaster
1 x RX IR Blaster
1 x Operating instructions
1 x 24V1A DC AU power supply

2 reviews for HDMI Cat Splitter 4k/1080p suit iQ4 to 40m HDBaseT

  1. Rated 5 out of 5

    Mauri (verified owner)

    Having tested many other products from other companies and wasted a lot of money and time, this is the only product that can do everything.
    You can connect any TV with 1.3/1.4/2.0 HDMI cable with 1.3/1.4/2.2 HDCP to the outputs and you can watch, record and play any 4K from the IQ4.
    This is my recent test after purchasing this great unit.
    Mine works using a HMDI switch to TV(1) 4K TV HDCP 2.2 for IQ4 (direct connection to IQ4).
    As well as it works using the same HMDI switch with 1m 4K cable plus a connector and 7m 1.4 HDMI (11 years old) cable to a wall plate with a .75m cable to the Transmitter connected to TV(2) 4K TV HDCP 1.4 with another .75m cable. (This TV shows every program at 3840×2160 4K resolution)
    Also works using the Receiver to TV(3) (11 year old) 2K TV HDCP 1.4 after using a 25m Cat6 and then a 1.5 meter HDMI 1.4 cable. (This TV shows everything including 4K programs at 1080P resolution)
    Finally it also works on my last test using the same Receiver that is using a 25m Cat6 cable, this is then connected to a 10m 1.4 HDMI cable (11 years old) to TV(4) a 2K TV with 1.4 HDCP. (This TV shows everything including 4K programs at 1080P resolution)
    So even with 11 year old HDMI cables and TV’s the product works.
    Great product Keith,
    Regards,
    Mauri.

  2. Rated 5 out of 5

    David (verified owner)

    Great unit, easy to set up and works perfectly. Found the IR sensor on the IQ4 – 135mm from the right hand edge – and can now control the unit remotely using the old Foxtel remote. Great 4k UHD picture on both TVs (just make sure you have configured the HDMI inputs correctly).
    Good work Keith.
    David

Add a review

Your email address will not be published. Required fields are marked *

You may also like…