HDMI Switcher 3×1 4k@60Hz HDR

$59.50

9 in stock

 

Fantastic 3×1 HDR HDMI Switch with Premium Chipset HDCP 2.2, supports 4K 60Hz 4:4:4, 10bit HDR, Full HD, UHD, CEC, Deep Colour to 36bit using quality”high speed” HDMI cables. Compatible with BT.2020, HEVC H.265 Codec | Supports all popular HDMI resolutions up to 1080p 60Hz / 4K 60Hz ULTRA HD, UHD 4Kx2K | 3840 x 2160. Keep in mind this is up to 60Hz for Australia not lesser 30Hz. Supports all kinds of HDR and common audio formats, Dolby Atmos, DTS: X, LPCM 7.1, DTHD, DD , Dolby True HD, etc. Backward compatible with previous HDMI version equipment. Read Reviews and see specs below.
New Batch arrived 21.1.2021

think HDMI think… EZYHD est. 2007

Compare
Category:

Specifications:

HDMI 2.0b, 3D, HDCP 2.2, HEVC H.265, FullHD, UltraHD, HDR, CEC, Deep Color up to 36bit
Compatible with lower HDMI versions
All common VESA / HDMI resolutions up to 4K 60Hz
Audio formats: Dolby Atmos, DTS: X, LPCM 7.1, DTHD, DD , Dolby True HD, etc.
HDR BT.2020 compatible up to YCbCr 4K / 24 4: 2: 2 12bit, 4K / 24 4: 4: 4/4: 2: 2 12bit, RGB 4K / 24 12 bit
SDR BT.709 compatible up to YCbCr 4K / 30 4: 4: 4 12bit, 4K / 30/60 4: 4: 4 8bit, 4K / 60 4: 2: 2 12bit; RGB 4K / 30/60 8bit
Integrated signal amplification and signal processing
Not suitable into soundbar (use ARC from TV)
Cable lengths output approx. 25m at 1080p and approx. 10m at 4K / 60Hz HDR by AWG 24 HDMI cable
Cable lengths Input approx. 20m at 1080p / approx. 5m at 4K / 60Hz HDR by AWG 24 HDMI cable
Switch by the button on the product or by IR remote control, (battery required CR2032 not supplied)
High quality power supply DC 5V1A, AC 100-240V to suit AU. Size: 111.5*53*21 (mm)
Weight: 156g/ 0.542lbs

PACKAGE CONTENTS:
1. Main unit 1pcs
2. AU 5V Power Adaptor 1pcs
3. Remote control 1 pcs (no battery)

Average Rating

2.00

01
( 1 Review )
5 Star
0%
4 Star
0%
3 Star
0%
2 Star
100%
1 Star
0%
Submit your review

Your email address will not be published. Required fields are marked *

1 Review For This Product

  1. 01

    by Anj Duvnjak (verified owner)

    I’m in two minds about this product (XOLORspace 23031 HDMI switcher 3×1). I’ve only had it one day and already ran into a bunch of stumbling blocks. I’ll break it down into pros/cons/neutral to help others make up their mind on purchasing.

    Pros
    – Can drive a passive 7.5 meter HDMI cable (Pro2 18GBPS 7.5m HL18G7.5M cable) without issue. I’m sending a 4K/60hz HDR 4:2:2 12bit signal to my projector – no drop outs and no flickers. This part impressed me, as I figured if anything, the output port might be lacking.
    – It can detect an input signal and automatically switch input ports. This doesnt seem to work all the time, but it saves using the remote some of the time.

    Cons
    – It does not work with a 10 meter Ruipro 4K active cable (connected to its output port). The same Ruipro cable works without issue between the same sources and projector (Epson TW9400) if the HDMI switcher is not in the chain.
    – On the first day of operation, I’ve already found it to become unresponsive twice. Which requires one to power it off and then back on to respond again. When unresponsive it will not react to the remote control or to the buttons on the unit itself (either the power button or input selector button). It will also not send a signal.

    Neutral
    – With the great specs I expected it to be able to handle 18Gbps signals. The included manual states the maximum bandwidth is 13.5Gbps. Unsure if this is a misprint. As stated above it does pass 4K/60Hz HDR 4:2:2: 12bit (without audio) just fine in my application.

    Personally I’m not sure if this will stay in my set up. I’m going to delay installing cable runs in the walls before sorting out what the go is with stability going forward, or if I can find another switcher that works with the Ruipro active cables.

    I would not recommend this product based on my limited time with it.

    • by team EZYHD

      Ruipro Fibre Optic cables should not be used this way, normally its source to display direct.
      We send this message with every cable:

      Long HDMI cable installation:
      Always test all cables before a wall or floor instal.
      If a wall instal always feed a long cable “down wall”- do not pull upwards.
      Do not join Ruipro in HDMI wall plates or place in a chain of HDMI devices.
      Do not pull cables by the plugs or it may damage the cable.
      Place a long HDMI cable in conduit to make it easier to instal & upgrade in the future.
      Keep dust cap on until use.

Shop By Department

HDMI Switcher 3x1 4k@60Hz HDR