HDMI Cat Splitter 4k/1080p HDBaseT suit iQ4


Out of stock

The new Colorspace 1×2 / 1×3 HDMI Splitter Extender supports HDBaseT 4K@60Hz, YUV4:4:4 colour and HDR, it can provide up to 40m at 4k and to 70m 1080p complete with auto down scaler for when a 4k TV is used  with 1080p TV’s. Supports HDMI 2.0 18Gbps, HDR10, HDCP 2.2, Bi-Directional IR POE. Uncompressed 4K@60Hz, with HDBaseT over Cat6.

This extender is a fantastic Video & Audio device with HDMI 2.0 full compliance, latest high dynamic range, plus Dolby True HD, DTS-HD Master Audio when available and also compatible with other HD multi-channel audio formats (Stereo, LPCM 5.1/7.1) pass through. Extends IR signal from source to receiver or from transmitter to receiver (bi-directionalI POE. Phoenix RS232 Port for firmware update or RS232 control signal transmission.

Has 1 HDMI cable loop out at transmitter and 2 x HDMI out at Receiver, can connect one local TV at transmitter and one or two remote TVs at receiver. Output 1080P 60Hz automatically when a non-HDCP 2.2 4k display is connected, comes complete with IR device control. Great unit for use with Foxtel iQ4, AppleTV4 etc.  yes folk’s nothing gets near this at the price!.

Newer model to world markets.
See specs below.
with full Aussie warranty of course!
think HDMI think EZYHD est. 2007

SKU: CSpace Category:


Bandwidth up to 18Gbps, resolution up to 4k@60hz, YUV4:4:4
Transmit up to 70m 1080p, 40m for 4k!
From RX receiver (if required) HDMI cable 10m or HDMI Cat extender 40m
Supports HDR 10, 3D
Video formats supported: 1080p up to 4k
Support 1, 2 or 3TV’s
Can control input device via IR from distant TV’s
With 1 x HDMI (loop) out at Transmitter and up to 2x HDMI out at Receiver
Bi-directional wide band IR and RS232Passthrough
Dual POC (can be powered by TX transmitter or by RX Receiver)
HDCP 2.2 – HDCP 1.4 Compliant
SEE EDID picture settings.

In Box:

1 x IR TX Sender
1 x IR RX unit
1 x TX IR Blaster
1 x RX IR Blaster
1 x Operating instructions
1 x 24V1A DC AU power supply

Average Rating


( 2 Reviews )
5 Star
4 Star
3 Star
2 Star
1 Star
Submit your review

Your email address will not be published. Required fields are marked *

2 Reviews For This Product

  1. 02

    by Bev Brown (verified owner)

    Quick and Easy to install
    Does exactly what it was purchased for.
    Great product.

    • by team EZYHD

      Yes Bev, even though its not cheap (about half the price of many others) it works so well carrying all that 4k data to 40m and 1080p to 70m over simple Cat6 cable.

  2. 02

    by David (verified owner)

    Great unit, easy to set up and works perfectly. Found the IR sensor on the IQ4 – 135mm from the right hand edge – and can now control the unit remotely using the old Foxtel remote. Great 4k UHD picture on both TVs (just make sure you have configured the HDMI inputs correctly).
    Good work Keith.

Shop By Department

HDMI Cat Splitter 4k/1080p HDBaseT suit iQ4


Add to Cart