HDMI 1×3 Splitter 4k over Cat6 712-V2.0


Available on backorder

This HDMI extender splitter can provide a beautiful picture, connect up to 3 HD TV’s from a source device like DVD, Blu Ray, Foxtel iQ4 to 30m via the TX sender and 1 HDMI cable to a local TV, uses a single CAT6 cable (one each) to the 2 RX receivers plus short HDMI to the other 2 TV’s, no streaming lag as its a direct connection. Note: Cat6 cable is recommended.
Supports high resolution of 4k@60Hz, and IR (pass back) control of source device like Foxtel, EDID pass through and only one power adapter for the miniature TX transmitter is required as RX receivers are POE, an ideal solution for a 2/3 TV instal. This unit is very popular and goes out fast. Note not suitable for mix of 1080p and non 4k TV's. See  specifications & Reviews below.
1.  Distribute 1 HDMI source up to 3 HDMI 4k displays over HDMI/network cable simultaneously.
2.  Support one HDMI Loop-out.
3.  Compatible with CAT6/6a/7 cables.
4.  The transmission distance is up to 30m
5.  The highest resolution supported is 4k@60Hz.
6.  Support 20~60Hz IR pass back.
7.  Support EDID Setting function.
8.  Support power from transmitter to receiver unit over the CAT6 cable.
9.  Plug and play.
10. Can be wall mounted, easy installation.
IQ2/3 Blutooth to IR remote to use splitters (IR) function, if required,
can be from previous iQ versions or had for about $20 off eBay or from Foxtel.
1 x TX sender – 1 in 3 out
2 x RX receivers
1 x IR Sender
2 x IR Blasters
1 x AU 5V power supply
Submit your review

Your email address will not be published. Required fields are marked *


There are no reviews yet.

Shop By Department

HDMI 1x3 Splitter 4k over Cat6 712-V2.0


Add to Cart